CodaPin contact probes and interfacing components

What are contact probes
and interfacing components?

Guaranteed next day UK delivery

Expert technical advice

Samples available on request

Product search

ISO9001 registered

LEGAL INFORMATION

Secured by SECPay

Copyright © 2008
Coda Systems Limited

Micro-probes

For very fine pitch testing of PCBs, semiconductors, substrates and devices, 0.46-0.76mm test centres

Standalone Bench-top Test Jigs

Robust, easily customised, standalone kits for testing a variety of PCB's. Basic hinged-top or
cam operated pusher plate, advanced cam-operated gate with fully adjustable pusher-fingers.

Test Jig Parts

Essential components for jig builders and customizers

General Purpose Probes - Updated range of products!

For general use in many test applications, such as in jigs & fixtures

Kelvin Test Pins, Accessories and Kelvin Pliers

Kelvin test pins, modules & fixture kits for the testing of transformers
& chokes, relays & solenoids, cable harnesses, Kelvin pliers for manual 4 pole testing

Interfacing Components

Battery contacts, spring contacts and lands of all shapes & sizes for a wide range of
applications; several fitment methods

ATE

2.54, 1.91 & 1.27mm centres. Lead free solder tip-styles. Twist action | Test System Interface | Testjet | Unpowered opens express | Polarity testjet | Insulated head | ATE travel indicator

Tools & Accessories

Receptacle & probe tools - Hand tools - Drill bits - Other specialised tools

High Current Probes

Current flows of up to 250 amps for many high power testing applications

Detection & Switching Probes

For presence & position detection

Coaxial Probes

RF coaxial probes for PCB & connector testing

Bladed Probes

Pinned plunger stops tip rotation which allows probing of connector pins in recessed slots

Extended Reach Probes

The extra long height and travel of these probes allows for probing into recesses and dual level fixturing

Pass Marking Units

A device which, upon receipt of a test pass signal, will scribe a permanent circular mark onto
the unit under test

Kelvin Probes

A range of concentric test probes intended specifically for making 4 to 6 pole (Kelvin) tests on PCBs, bus bars, equipment chassis and screw heads.

Pneumatic Probing Systems

Testing system which uses air-driven test probes; avoids the need to have a moving
probe plate

CODA SYSTEMS LIMITED • Oak Road, Little Maplestead, Halstead, Essex, CO9 2RT United Kingdom
Tel: +44 (0) 1787 478678 • Fax: +44 (0) 1787 274194 • Registered Office: Reg. No. 1470428 England
sales@coda-systems.co.uk • technical@coda-systems.co.uk