CODA-PIN Contact Probes & Interfacing Components

High Current Test Probes

High Current Test Probes • HD-PA3 Series • HD-PA4 Series • HD-PA5 Series • HD-PA6 Series • HD-PA7 Series • HD-PA8 Series • HD-PA9 Series • HD-PA10 Series •

HD-PA6BS - BULLET NOSE

This range of probes can be used for load and functional testing of power components such as semiconductors, solenoids, loaded PCBs, bus-bars, wound components and batteries. They share identical dimensions and will readily intermix with the PA3, PA4, PA5, PA6 and PA7 general purpose probes. In particular, the HD-PA4 series is physically interchangeable with the PA4 series used in standard ATE test fixtures. The HD-PA7 series can be found on the following page.

Specification Full travel 6.35mm Working travel 4.24mm Spring force initial at wkg travel   24g 136g Operating temp. range -55 C to +105 C Current rating DC cont 25 Amps Minimum test centres 4.75mm   Assembly information