CODA-PIN Contact Probes & Interfacing Components

sales@coda-systems.co.uk
technical@coda-systems.co.uk

Tel: +44 (0)1787 478678
Fax: +44 (0)1787 274194

What are Test Probes?
What are Interfacing Components?

Interfacing Components

Test Products

CODA SYSTEMS LIMITED
Oak Road, Little Maplestead, Halstead,
Essex, CO9 2RT United Kingdom
Tel: +44 (0)1787 478678
Fax: +44 (0)1787 274194
Email: sales@coda-systems.co.uk

Registered in England No. 1470428

Tools and Accessories

Receptacle Tools

Receptacle Insertion
Receptacle Insertion Tools (RIT) are for inserting the receptacle into the hole without damage. In some ranges an adjustable tool is available which can be set to the required mounting height by use of a locking allen screw. The height required can either be set using a spare receptacle or by setting up the tool on an adjacent installed receptacle.

Series
Test Centre
Mounting Height
Part No. * adjustable
RA0
0.76mm
Flush
TA0
LRC1
1.27mm
Flush to 7.24mm (0.285")
TC1A*
RA1
(0.050")
Flush
TA1
RA2 / LRA2
2mm (0.075")
Flush
TA2
RA2
2mm
Flush to 3.18mm (0.125")
TA2A*
LRA2
2mm
Flush to 5.59mm (0.220")
TA2A*
RA3
2.54mm
Flush to 4.75mm (0.187")
TA4A*
RA3 , RA4
(0.1")
Flush
TA3
RA4
-
Flush to 5.59mm (0.0220")
TA4A*
RA5
3.18mm
Flush
TA5
RA6
4.75mm
Flush
TA6
RA7
(0.187")
Flush
TA7
RC1
2.54mm
0.127mm (0.005")
TC1

Receptacle Removal Kits
For the removal of A.T.E. receptacles which are either worn or broken. Three kits are available to make a once difficult job very easy. A separate kit is required for each standard test centre spacing. Each kit contains a tool to initially set the receptacle flush and another tool to punch the receptacle all the way through the hole. Standard Coda-Pin receptacle insertion tools are required to install the new receptacle.

Test Centre
Receptacle Series
Part No.
0.1" (2.54mm)
RA4
RRTRA4
0.075" (1.91mm)
LRA2
RRTLRA2
0.050" (1.27mm)
LRC1
RRTLRC1

View all products in this series

Probe Tools

Probe removal hooks
For the removal of headed probes in the LPA2, ELPA2, PA4, LPA4 and ELPA4 series from crowded test fixtures. Only for head sizes 1.2 to 2.0mm.

Probe insertion tools
These PIT's allow the installation of certain series of test probes into their receptacles with less risk of damage by handling.

View all products in this series

Miscellaneous Tools

Wrap/strip/unwrapping hand tools
Two versatile tools which make attaching a wire onto wirewrap receptacles easy. These tools will strip the
wire and wrap it neatly as well as unwrapping any wiring that needs to be altered. WHT26M is suitable for the larger 26 AWG and provides a 'modified' wrap. The WHT30 provides a standard wrap for the more common 30 AWG wire size.

Gram force dial gauge
A pocket-size dial gauge for identifying the initial and working spring force of unknown test probes. Using a paddle style flat feeler, the instrument permits measurements in both clockwise and anti-clockwise directions and has a secondary ‘maximum’ pointer. Supplied in a clear plastic storage case with instructions.
Capacity: 250g - 25 - 250g
Please contact us for other capacities.

Engineers dial calliper
A pocket-sized, low-cost dial calliper ideal for measuring probe tip diameter, receptacle height and plunger travel. Manufactured from high quality engineering grade plastic which will not scratch delicate items, this calliper is ideal for factory technicians. Capacity 100mm, metric graduations with resolution down to 0.1mm.

View all products in this series

Drill Bits

Tungsten carbide drill bits
Ideal for drilling holes for receptacle or probe installation. Suitable for most materials the standard flute length is 10mm. A few of the sizes have an option of longer flute length for thicker probe plate material.
Please contact us for any other sizes.

Series
Flute Diameter (mm)
Flute Length (mm)
Part No.
PA0
0.55
7.0
DA0
PA0S
0.70
7.0<
DA0R
RA1
0.90
9.8
DA1
RA2, LRA2
1.40
10.5
DA2
RA3, RA4, RC1
1.70
10.5
DA3
RA3, RA4, RC1
1.75
10.5
DA3A
PA5, PD7
2.40
10.5
DA5
RA6
2.75
10.5
DA6
RA7
3.60
12.3
DA7
LRC1
0.97
9.8
DRC1
RS3, RD1
2.00
10.5
DS3
RS6, RC8
3.00
10.5
DS6
IPP1
1.45
10.5
DI3
IPG1 / IPZ1 / IPF1
1.40
10.5
DI1
IPP2
2.15
10.5
DI2
RD3
3.50
12.3
DD3
PE3
6.40
12.3
DE3
RC4
5.60
12.3
DC4
LRC1
0.95
16.0
DRC1L
LRA2
1.40
16.0
DA2L
RA4
1.70
16.0
DA3L
Shank =3.175mm (3/8") OAL = 38mm

View all drill bits