CODA-PIN Contact Probes & Interfacing Components

sales@coda-systems.co.uk
technical@coda-systems.co.uk

Tel: +44 (0)1787 478678
Fax: +44 (0)1787 274194

What are Test Probes?
What are Interfacing Components?

Interfacing Components

Test Products

CODA SYSTEMS LIMITED
Oak Road, Little Maplestead, Halstead,
Essex, CO9 2RT United Kingdom
Tel: +44 (0)1787 478678
Fax: +44 (0)1787 274194
Email: sales@coda-systems.co.uk

Registered in England No. 1470428

Tools and Accessories

Tools and Accessories • Receptacle Tools • Probe Tools • Miscellaneous Tools • Drill Bits •

Receptacle Tools

Receptacle Insertion
Receptacle Insertion Tools (RIT) are for inserting the receptacle into the hole without damage. In some ranges an adjustable tool is available which can be set to the required mounting height by use of a locking allen screw. The height required can either be set using a spare receptacle or by setting up the tool on an adjacent installed receptacle.

Series
Test Centre
Mounting Height
Part No. * adjustable
RA0
0.76mm
Flush
TA0
LRC1
1.27mm
Flush to 7.24mm (0.285")
TC1A*
RA1
(0.050")
Flush
TA1
RA2 / LRA2
2mm (0.075")
Flush
TA2
RA2
2mm
Flush to 3.18mm (0.125")
TA2A*
LRA2
2mm
Flush to 5.59mm (0.220")
TA2A*
RA3
2.54mm
Flush to 4.75mm (0.187")
TA4A*
RA3 , RA4
(0.1")
Flush
TA3
RA4
-
Flush to 5.59mm (0.0220")
TA4A*
RA5
3.18mm
Flush
TA5
RA6
4.75mm
Flush
TA6
RA7
(0.187")
Flush
TA7
RC1
2.54mm
0.127mm (0.005")
TC1

Receptacle Removal Kits
For the removal of A.T.E. receptacles which are either worn or broken. Three kits are available to make a once difficult job very easy. A separate kit is required for each standard test centre spacing. Each kit contains a tool to initially set the receptacle flush and another tool to punch the receptacle all the way through the hole. Standard Coda-Pin receptacle insertion tools are required to install the new receptacle.

Test Centre
Receptacle Series
Part No.
0.1" (2.54mm)
RA4
RRTRA4
0.075" (1.91mm)
LRA2
RRTLRA2
0.050" (1.27mm)
LRC1
RRTLRC1