CODA-PIN Contact Probes & Interfacing Components

Micro Test Probes

Micro Test Probes • PM1 Series • PM2 Series • PM2 'R' Series • PM3 'R' Series • PA0 Series • PA0 'R' Series • PA1 Series (Short Travel) •

PM1 Series

Non-replaceable. No receptacle. 0.46mm test centres. Drill hole size - 0.27mm-0.28mm

Specification Full travel 1.00mm Working travel 0.67mm Spring force at wkg travel 15g Current rating DC 1 Amp Minimum test centres 0.46mm   INSTALLATION The non-replaceable microprobes feature a collar at the top of the barrel, which is used as a stop in the fitment process. Due to the minute barrel diameters and thin walls, it is imperative that the drilled hole diameter (0.27mm - 0.28mm) & straightness are very accurate. We recommend that the pre-wired option is taken as connecting a cable to these probes is an extremely delicate operation. Usually, multi-plate fixtures containing no less than 3 plates, are used to retain large multiples of probes. Otherwise a block of stable material which will allow reliable drilled holes is to be recommended, with the microprobe fitted wire/tail first with tweezers, with a small amount of locking compound on the side to secure it, if required.

Tip Style POINT PM1B	Tip Style POINT - 600mm 33AWG cable attached PM1B-W33