CODA-PIN Contact Probes & Interfacing Components

Extended Reach Test Probes PJ Range

Extended Reach Test Probes • ELPA2 Series • LPA4 Series • ELPA4 Series • LPA5 Series • LPA7 Series • PJ Range • PJ1 Series • PJ2 Series • PJ3 Series •

PJ3 Series

Very long reach test probes, robust in construction - making them ideal for component or sub-assembly testing. The through-pin plunger allows direct connection to the tail for the cable, for a lower resistance path thus allowing a higher current ability. This rage press-fit into the fixture plate, without the need for a receptacle. Our dedicated cable and plug assemblies can be used for connection, or you can solder a multistrand cable directly to the tail. The cable assemblies are available in 10 colours, for ease of identification.

The RJ1 leads are required to make the electrical connection to the tail of the probe. These are manufactured from 10/0.1 multistrand cable and are crimped to a heatshrunk 1.0mm push-on terminal plug, thus making them re-usable. They are available in the colours as shown. Specification Test centres (min) 6.0mm Working travel 10-12mm Spring force at wkg travel   230gm Mounting hole size 3.5mm Current rating Max 15 amps Ask for alternative tip-styles and heights Fitment Press fitment into an 8 to 10mm thick probe plate (nylon, FR4 or plastic) Connection RJ3-C Blank plug for your cable. Suggest 10/0.12 multistrand. Ask for pre-wired version of these.

-Tip Style BULLET NOSE PJ3D-21	-Tip Style INSULATED HEAD 4mm/Height - 20mm PJ3FP4.0-20
-Tip Style INSULATED HEAD 4mm/Height = 25mm PJ3FP4.0-25	-Tip Style INSULATED HEAD 4mm/Height = 27mm PJ3FP4.0-27
-Tip Style INSULATED HEAD 4mm/Height = 30mm PJ3FP4.0-30	-Tip Style SERRATED HEAD - 2.6mm PJ3H2.6-21
-Tip Style SERRATED HEAD - 3.2mm PJ3H3.2-21	-Tip Style SERRATED HEAD - 4.0mm PJ3H4.0-21