CODA-PIN Contact Probes & Interfacing Components

High Current Test Probes

High Current Test Probes • HD-PA3 Series • HD-PA4 Series • HD-PA5 Series • HD-PA6 Series • HD-PA7 Series • HD-PA8 Series • HD-PA9 Series • HD-PA10 Series •

HD-PA5 Series

This range of probes can be used for load and functional testing of power components such as semiconductors, solenoids, loaded PCBs, bus-bars, wound components and batteries. They share identical dimensions and will readily intermix with the PA3, PA4, PA5, PA6 and PA7 general purpose probes. In particular, the HD-PA4 series is physically interchangeable with the PA4 series used in standard ATE test fixtures. The HD-PA7 series can be found on the following page.

Specification Full travel 6.35mm Working travel 4.24mm Spring force initial at wkg travel 'S' light spring 44g 126g 'X' heavy spring (where shown) 85g 199g Operating temp. range -55 C to +105 C Current rating DC cont 15 Amps Minimum test centres 3.18mm   Assembly information Receptacles : Mounting hole size: 2.39/2.44mm. 2.4mm drill is most commonly used: Drill part no. DA5. RIT tool part no. TA5, TA5V-220

See receptacles at bottom of page

Tip Style CONCAVE HEAD HD-PA5AS	Tip Style BULLET NOSE HD-PA5BS
Tip Style PLAIN SERRATED HEAD - H Spring HD-PA5HPS Light spring   HD-PA5HPX Heavy spring	Tip Style SERRATED HEAD HD-PA5HS Light spring   HD-PA5HX Heavy spring
Tip Style SERRATED HEAD - 3.9mm L Spring HD-PA5HS-3.9	Tip Style SERRATED HEAD - 3.9mm H Spring HD-PA5HX-3.9
Tip Style PYRAMID HEAD - 2.5mm H Spring HD-PA5TS	Tip Style PYRAMID HEAD - 2.5mm L Spring HD-PA5TX
Receptacle SOLDER CUP RA5S