CODA-PIN Contact Probes & Interfacing Components

Extended Reach Test Probes

Extended Reach Test Probes • ELPA2 Series • LPA4 Series • ELPA4 Series • LPA5 Series • LPA7 Series • PJ Range • PJ1 Series • PJ2 Series • PJ3 Series •

ELPA4 Series

The ELPA4 series has an extra-long full travel of .492” (12.5mm) compared with the .410” (10.4mm) of the LPA4 series, and with .250” (6.35mm) of the standard PA4 series ATE probes. They will fit the standard RA4 series receptacles. Additionally the ELPA4 series probes has spring force of 8.8oz (250gm) which will help in penetrating contaminates on unclean test points.

Specification Full travel 12.5mm (.492") Working travel 9.6mm (.378") Spring forces initial at wkg travel   70g (2.5oz) 250g (8.8oz) Current rating DC cont 3 Amps Minimum test centres 2.54mm (.100")   Assembly information Receptacles : Mounting hole size: 1.7/1.75mm. 1.75mm drill is most commonly used: Drill part no. DA3. RIT tool part no. TA3 and TA4A

See receptacles at bottom of page

Tip Style SERRATED HEAD ELPA4HX	Tip Style NEEDLE ELPA4NX
Tip Style PLAIN CROWN ELPA4QX-040	Tip Style CROWN HEAD ELPA4QX-060
Tip Style TULIP HEAD ELPA4RX	Tip Style PYRAMID HEAD ELPA4TX
Receptacle CRIMP RA4C	Receptacle SOLDER CUP RA4S
Receptacle 0.64mm ROUND PIN RA4R	Receptacle 1.0mm ROUND PIN RA4R-040
Receptacle WIRE-WRAP RA4W