CODA-PIN Contact Probes & Interfacing Components

Standalone Bench-top Test Jigs Test Jigs

Standalone Bench-top Test Jigs • Test Jigs • MF Series • CMF Series • CGF Series •

CMF Series

The CMF series uses fixed position push fingers and is designed to test low to medium density PCBs, such as those containing conventional and surface mount circuitry. Typical examples of their usage are:
- Repair and calibration stations.
- Low to medium volume testing of PCBs - such as power supplies and control boards.
- Double-sided probing of the PCB is possible with this design.

This series has a cam-operated FR4 top plate fitted onto a hinged lid. When the lid is latched closed the handle will then push down the top plate, with the provided pusher rods, ensuring a true linear downward motion onto the PCB. Test probes can be fitted into both the base plan's probe plate and, to a limited extent, on the top plate allowing some double-sided probing.

For jig customisation components such as tooling pins or guide plates, available options and guidance as to which type of spring probes to use - please see the other sections within this one.

Coda part no.	Base box size W x L x D (mm)	Max U.U.T. (mm)	Max node count (6oz probes)	Notes
CMF1	200 x 300 x 100	140 X 220	300	'S' suffix means that the latch is on the long side of the pan. Width (W) is the latch/hinge side. Depth (D) is the pan's internal depth.
CMF1S	300 x 200 x 100	240 x 100	300
CMF2	300 x 400 x 100	225 x 300	600
CMF2S	400 x 300 x 100	340 x 220	550
CMF3	400 x 500 x 100	340 x 400	600
CMF3S	500 x 400 x 100	440 x 310	600
CMF4S	600 x 500 x 100	550 x 420	800

CMF series extra options
- Shallow pan, 65mm deep
- Sloping pan so that the probe plate faces you a little more (available for CMF2S & CMF3S)
- Perspex/acetyl transparent top plate - for PCB visibiliy
- Riser block sets - for PCBs with taller components
- Extra pusher fingers: PF1
- Dual-well version

Fixture customisation accessories
Rigid tooling pins: Long length tooling pins, with an M4 thread, suitable for loaded baord testing. M4 nuts & washers included. Bullet nose tip. Drill hole size: 3.95 - 4.0mm
Note: You may need to drill the top plate to allow the tooling pin to pass through.

Floating pins: for keeping the PCB raised away from the probes until the top plate is lowered. Also useful for leveling pressure in unpopulated areas. Drill hole size: 2.88 - 2.89mm

Recommended Coda-Pin probes for the CMF series
- HD-PA4 to HD-PA6 series for high current applications.
- Switching probes, such as PS3 and PS6, for presence detection applications.

Robust test jig, using a cam-operated horizontal probe plate - self customisation.

- MECHANICAL JIG KIT - cam operated CMF1	- MECHANICAL JIG KIT - cam operated CMF1S
- MECHANICAL JIG KIT - cam operated CMF2	- MECHANICAL JIG KIT - cam operated CMF2S
- MECHANICAL JIG KIT - cam operated CMF3	- MECHANICAL JIG KIT - cam operated CMF3S
- MECHANICAL JIG KIT - cam operated CMF4S	Spare Part RIGID TOOLING PINS - short taper RLTP1.95 - 1.95mm OD   RLTP2.45 - 2.45mm OD   RLTP2.95 - 2.95mm OD   RLTP3.15 - 3.15mm OD
Spare Part RIGID TOOLING PINS - long taper RLTP3.45 - 3.45mm OD   RLTP3.75 - 3.75mm OD   RLTP3.85 - 3.85mm OD   RLTP3.95 - 3.95mm OD	Spare Part FLOATING PIN 3.5mm cap FP1-35
Spare Part FLOATING PIN 6mm cap FP1-60