CODA-PIN Contact Probes & Interfacing Components

sales@coda-systems.co.uk
technical@coda-systems.co.uk

Tel: +44 (0)1787 478678
Fax: +44 (0)1787 274194

What are Test Probes?
What are Interfacing Components?

Interfacing Components

Test Products

CODA SYSTEMS LIMITED
Oak Road, Little Maplestead, Halstead,
Essex, CO9 2RT United Kingdom
Tel: +44 (0)1787 478678
Fax: +44 (0)1787 274194
Email: sales@coda-systems.co.uk

Registered in England No. 1470428

ATE Test Probes

PA4 & ST-PA4 Series

2.54mm / 0.10" centres

The PA4 series is the universal choice for use in the majority of ATE test fixtures and has a very wide range of tip styles for most test applications. Additionally, a choice of up to six spring forces is offered. Many of these tip styles now incorporate ECT's PogoPlus bias ball technology which will guarantee an uninterrupted internal contact with a consistently low resistance figure; typically 8më. This virtually eliminates probe related false opens, an important issue in today's tough test environment and allows high current capability from a standard product. The ST-PA4 series has special hard steel tips which ensure an exceptional resistance to wear on the faces. This enables good penetration of any residual contaminants on test surfaces, particularly for lead-free solders. Please see our lead-free section.

Specification
Full travel
6.35mm (.250")
Working travel
4.24mm (.167")
Spring force
at wkg travel
'L' Extra light spring
57g (2.0oz)
'S' Light spring
114g (4.0oz)
'X' Heavy spring
170g (6.0oz)
'E' Extra heavy
227g (8.0oz)
'U' Ultra heavy spring
283g (10.0oz)
'W' Ultra heavy spring
350g (12.0oz)
Current rating DC
cont shown with tip style
Minimum test centres
2.54mm (.100")

Assembly information

View all tipstyles , receptacles and lead-free solder tipstyles in this series

LPA2 & ST-LPA2 Series

1.91mm / 0.075" centres

The LPA2 series probes are designed to be used on .075 (1.91mm) minimum centres. They have the same .250 (6.35mm) travel as the standard ATE probes in the PA4 series and are therefore fully compatible with the larger PA5, PA6 and PA7 series probes.

The ST-LPA2 series have special hard steel tips which ensure an exceptional resistance to wear on the cutting faces. This enables good penetration of any residual contaminants on test surfaces, particularly for lead-free solders.

Specification
Full travel
6.35mm (.250")
Working travel
4.24mm (.167")
Spring force
at wkg travel
'S' Light spring
114g (4.0oz)
'X' Heavy spring
170g (6.0oz)
'U' Ultra heavy spring
227g (8.0oz)
'W' Ultra heavy spring
283g (10.0oz)
Current rating DC
6 amps
Minimum test centres
1.91mm (.075")

Assembly information

View all tipstyles , receptacles and lead-free solder tipstyles in this series

LPC1 & ST-LPC1 Series

1.27mm / 0.050" centres

Specially designed for use on boards containing test pads which are on .050" (1.27mm) centres. The excellent pointing accuracy (maximum positional error of tip relative to axis of probe), combined with the full travel of .250" (6.35mm) ensures full compatibility with the standard PA4 series ATE probes. Specially designed for use in high throughput test fixtures, the ST-LPC1 series is a development of the LPC1 series which has special hard steel tips to ensure an exceptional resistance to wear on the contact faces. This enables good penetration of any residual contaminants on test surfaces, particularly for lead-free solders.

Specification
Full travel
6.35mm (.250")
Working travel
4.24mm (.167")
Spring force
at wkg travel
'S' Light spring
114g (4.0oz)
'X' Heavy spring
170g (6.0oz)
'U' Ultra heavy spring
227g (8oz)
Minimum test centres
1.27mm (.050")

Assembly information

View all tipstyles , receptacles and lead-free solder tipstyles in this series