ST-LPA2RX Heavy Spring

ST-LPA2RX

The LPA2 Series is the universal size for use at 1.91mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPA2 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPA2 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.
Qty Price Each (£ GBP, EX VAT)
1 - 49 2.72
50 - 99 1.94
100 - 249 1.70
250 - 499 1.51
500 - 999 1.36
1000 - 2999 1.24
Available Stock : 40

Lead time for additional qty approximately: 12 days

Single Item Price from: £2.72

Test Probe Specification

Full travel
6.35mm (.250″)
Working travel
4.24mm (.167″)
Spring force at wkg travel
‘S’ Light spring 114g (4.0oz)
‘X’ Heavy spring 170g (6.0oz)
‘U’ Ultra heavy spring 227g (8.0oz)
Current rating DC (maximum continuous) 6 amps
Minimum test centres 1.91mm (.075″)
Temperature range -55’C – + 150’C

Receptacle Specification

Mounting hole size: 1.35/1.4mm.
1.4mm drill is most commonly used:
Drill part no. DA2. RIT tool part no. TA2,TA2A

How To Use

Product Selection
Fitment & Usage
After Care