SD-MINI-2PC-SC Spring contact side

SD-MINI-2PC-SC

This is the spring contact side of our two pin, spring loaded interface array. Ideal for power transfer between handheld devices and docking stations. Instead of spending a lot of time designing your own bespoke interface, Swift-Dock can be integrated into the design of a handheld device and docking station. The spring contact side which is usually utilized in the docking station is paired with the contact land side which is used in the handset. Also available with light spring option. The PCB is supplied with a connector.
  • Quotations available for quantities greater than 20 000. Please contact us.
  • CAD files available from the downloads tab below.
Qty Price Each (£ GBP, EX VAT)
1 - 49 5.36
50 - 99 5.36
100 - 249 4.25
250 - 499 4.25
500 - 999 4.25
1000 - 2999 3.45
3000 - 4999 3.45
5000 - 9999 3.45
10000 - 20000 3.05
Available Stock : 12

Lead time for additional qty approximately: 14 days

Single Item Price from: £5.36

 

 

Spring Contact and Land Specification

No. of contacts
2
Maximum travel
2.65mm
Recommended travel (Max)
1.75mm
Recommended travel (Min)
1.35mm
Spring force at recommended travel (Max)
200g (2 pins)
Current rating DC (max)
2 amps DC cont; per pin.
Material; spring contact & land
Gold plated brass
Operating temperature range
-40 – to +150’C

 

Moulding Specification

Material
Nylon6
Colour
Black. Other colours available for volume qtys
Fitment screw hole size
Stainless M2 bolt, countersunk head
UL rating
UL94-2. By request UL94-0
IP rating
IP50, IP55 with gasket. Land connector IP67 with rear sealing

 

PCB connection specification

Cable type for solder connection
Equipment wire, multi-strand 16/0.2 – 3 amp DC or 7/0.25 – 1 amp DC

 

Please note:

Available without PCB if required. Please see entire range on main Swift-Dock page.