Please be assured that Coda is open for business as usual. Some of our staff are working remotely and some are in the office.
Our office will now be open between 9am and 3pm. Between 3pm and 5pm please email us and our remote team will deal with your enquiry.
Also, due to extra precautions we are taking with goods-in, lead times may be a few days longer than normal.

Specialist Test Products > Micro Test Probes > PM2 Series >

PM2B-W33 - POINT - Pre-wired with 800mm 33 AWG

Non-replaceable. No receptacle. 0.51mm test centres. Drill hole size - 0.34mm to 0.36mm.

Test Probe Specification

Full travel
Working travel
Spring force
at wkg travel
Current rating DC (max)
2 AmpS
Minimum test centres


The non-replaceable microprobes feature a collar at the top of the barrel, which is used as a stop in the fitment process. Due to the minute barrel diameters and thin walls, it is imperative that the drilled hole diameter (0.34mm - 0.36mm) and straightness are very accurate. We recommend that the pre-wired option is taken as connecting a cable to these probes is an extremely delicate operation.

Usually, multi-plate fixtures containing no less than 3 plates, are used to retain large multiples of probes.

Otherwise a block of stable material which will allow reliable drilled holes is to be recommended, with the microprobe fitted wire/tail first with tweezers, with a small amount of locking compound on the side to secure it, if required.

Tip Style - POINT - Pre-wired with 800mm 33 AWG
The diagram below shows the tipstyle to this part no..

POINT - Pre-wired with 800mm 33 AWG

Qty Price each ex VAT
< 50
50 - up
> 100

Available ex stock: 30
Lead time for additional qty: 20 days