Specialist Test Products - Micro Test Probes -

Test Probe Specification

Installation

The non-replaceable micro test probes feature a collar at the top of the barrel, which is used as a stop in the fitment process. Due to the minute barrel diameters and thin walls, it is imperative that the drilled hole diameter (0.27mm - 0.28mm) and straightness are very accurate. We recommend that the pre-wired option is taken as connecting a cable to these probes is an extremely delicate operation.

Usually, multi-plate fixtures containing no less than 3 plates are used to retain large multiples of probes.

Otherwise a block of stable material which will allow reliable drilled holes is to be recommended, with the micro test probe fitted wire/tail first with tweezers, with a small amount of locking compound on the side to secure it, if required.