Interfacing Components General Purpose Test Probes

ATE Test Probes -

LPC1TX-038 - PYRAMID HEAD - Heavy spring

1.27mm / 0.050" test centre

The LPC1 Series is the universal size for use at 1.27mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPC1 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPC1 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.

Test Probe Specification

Full travel	6.35mm (.250")
Working travel	4.24mm (.167")
Spring force	at wkg travel
'S' Light spring	114g (4.0oz)
'X' Heavy spring	170g (6.0oz)
'U' Ultra heavy spring	227g (8oz)
Minimum test centres	1.27mm (.050")

Receptacle Specification

Mounting hole size: 0.97/0.99mm.
0.95mm drill is most commonly used:
Drill part no. DRC1. RIT tool part no. TC1A, TRC1

How to Use

Tip Style - PYRAMID HEAD - Heavy spring
The diagram below shows the tipstyle to this part no..

ATE PROBE/Pyramid head/Hvy spring

Qty	Price each ex VAT
< 50	£2.42
50 - up	£1.72
100 - up	£1.51
250 - up	£1.34
500 - up	£1.21
1000 - up	£1.10
3000 - up	£1.01
5000 - up	£0.93
> 10000	£0.86

Available ex stock: 190
Lead time for additional qty: 7 days

Quantity:

Related products:

1. CRIMP (Ref: LRC1C) - Receptacle

2. SOLDER CUP (Ref: LRC1S) - Receptacle

3. PLUG-ON (Ref: LRC1P) - Receptacle

4. QUICKFIT (Ref: LRC1Q) - Receptacle

5. PLUG 30awg BLUE (Ref: CR30) - Connecting Lead