LPC1TS-020 Light Spring

LPC1TS-020

The LPC1 Series is the universal size for use at 1.27mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPC1 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPC1 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.
Qty Price Each (£ GBP, EX VAT)
1 - 49 2.72
50 - 99 1.94
100 - 249 1.70
250 - 499 1.51
500 - 999 1.36
1000 - 4999 1.24
Available Stock : 40

Lead time for additional qty approximately: 12 days

Single Item Price from: £2.72

Test Probe Specification

Full travel 6.35mm (.250″)
Working travel 4.24mm (.167″)
Spring force at wkg travel
‘S’ Light spring 114g (4.0oz)
‘X’ Heavy spring 170g (6.0oz)
‘U’ Ultra heavy spring 227g (8oz)
Minimum test centres 1.27mm (.050″)
Temperature range -55’C to +150’C

Receptacle Specifications

Mounting hole size: 0.97/0.99mm.
0.95mm drill is most commonly used:
Drill part no. DRC1. RIT tool part no. TC1A, TRC1

How To Use

Product Selection
Fitment & Usage
After Care