Interfacing Components General Purpose Test Probes

ATE Test Probes -

LPA2TX-030 - SHARP PYRAMID Heavy spring

1.91mm / 0.075" test centres

The LPA2 Series is the universal size for use at 1.91mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPA2 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPA2 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.

Test Probe Specification

Full travel	6.35mm (.250")
Working travel	4.24mm (.167")
Spring force	at wkg travel
'S' Light spring	114g (4.0oz)
'X' Heavy spring	170g (6.0oz)
'U' Ultra heavy spring	227g (8.0oz)
'W' Ultra heavy spring	283g (10.0oz)
Current rating DC (max)	6 amps
Minimum test centres	1.91mm (.075")

Receptacle Specification

Mounting hole size: 1.35/1.4mm.
1.4mm drill is most commonly used:
Drill part no. DA2. RIT tool part no. TA2,TA2A

How to Use

Tip Style - SHARP PYRAMID Heavy spring
The diagram below shows the tipstyle to this part no..

ATE PROBE/Sharp pyramid/Heavy spring force

Qty	Price each ex VAT
< 50	£2.17
50 - up	£1.55
100 - up	£1.36
250 - up	£1.08
1000 - up	£0.99
3000 - up	£0.90
5000 - up	£0.83
> 10000	£0.78

Available ex stock: 201
Lead time for additional qty: 7 days

Quantity:

Related products:

1. CRIMP (Ref: LRA2C) - Receptacle

2. SOLDER CUP (Ref: LRA2S) - Receptacle

3. ROUND PIN (Ref: LRA2R) - Receptacle

4. 1mm ROUND PIN (Ref: LRA2R-040) - Receptacle

5. WIRE-WRAP (Ref: LRA2W) - Receptacle

6. WIRE WRAP (Ref: LRA2W10) - Receptacle

7. WIRE WRAP (Ref: LRA2WL) - Receptacle

8. WIRE WRAP (Ref: LRA2WLL) - Receptacle