ATE Test Probes - ATE Technology and Support Items -

Receptacle Insertion

Receptacle Insertion Tools (RIT) are for inserting the receptacle into the hole without damage. In some ranges an adjustable tool is available which can be set to the required mounting height by use of a locking allen screw. The height required can either be set using a spare receptacle or by setting up the tool on an adjacent installed receptacle.

Receptacle Removal Kits

For the removal of A.T.E. receptacles which are either worn or broken. Three kits are available to make a once difficult job very easy. A separate kit is required for each standard test centre spacing. Each kit contains a tool to initially set the receptacle flush and another tool to punch the receptacle all the way through the hole. Standard Coda-Pin receptacle insertion tools are required to install the new receptacle.

Tungsten carbide drill bits

Ideal for drilling holes for receptacle or probe installation. Suitable for most materials the standard flute length is 10mm. A few of the sizes have an option of longer flute length for thicker probe plate material.
Please contact us for any other sizes.