Specialist Test Products > Ultra-high Current Test Probes >

For load and functional testing of bus-bars and batteries. Current flows up to 400 amps.

HD-PA18 Series

Test Probe Specification

Full travel
6.35mm
Working travel
4.24mm
Spring force
initial
at wkg travel
454g
729g
Operating temperature range
: -55 C to +150 C
Current rating DC cont (max)
50 Amps
Minimum centre spacing
7mm

Receptacle Specification

Mounting hole size: 4.75 - 4.80mm (5.95 - 6.00mm with receptacle)
Epoxy or interference fitment


View all tipstyles and receptacles in this series

HD-PA8 Series

This series has an even higher current handling capacity than the standard heavy duty HD ranges. By use of through-pin construction and a silver alloy contacting area, current flows of up to 80 amps can be passed. The probe bolts into the probe plate and will easily disassemble for cleaning. Uses for this range include load and functional testing of bus-bars and batteries.

Test Probe Specification

Full travel
9mm Light Spring
 
6mm Heavy Spring
Working travel
4mm
Spring forces
initial
at wkg travel
Light spring
300g
520g
Heavy spring
1000g
2000g
Current rating DC cont
50 Amps
short-term max 80 Amps
Temperature range to 100 C

Notes:Bolt-in fitment - Supplied with fixings - Drill hole size 8mm - M5 solder-tag included for tail connection to your braided cable.

View all tipstyles and receptacles in this series

HD-PA9 Series

This series has an even higher current handling capacity than the standard heavy duty HD ranges. By use of through-pin construction and a silver alloy contacting area, current flows of up to 100 amps can be passed. The probe bolts into the probe plate and will easily disassemble for cleaning. Uses for this range include load and functional testing of bus-bars and batteries.

Test Probe Specification

Full travel
7mm
Working travel
4mm
Spring forces
initial
at wkg travel
500g
950g
Current rating DC cont
70 Amps
 
short-term max 100 Amps
Temperature range to 100 C

Notes:Bolt-in fitment - Supplied with fixings - Drill hole size 11mm - M8 solder-tag included for tail connection to your braided cable - Kelvin/4-pole versions also available

View all products in this series

HD-PA10 Series

This series has an even higher current handling capacity than the other heavy duty HD ranges. By use of through-pin construction and a silver alloy contacting area, current flows of up to 250 amps can be passed. The probe bolts into the probe plate and will easily disassemble for cleaning. Uses for this range include load and functional testing of bus-bars and batteries.

Test Probe Specification

Full travel
6.5mm
Working travel
4.2mm
Spring forces
initial
at wkg travel
1500g
4500g
Current rating DC cont
200 Amps
short-term max 250 Amps
Temperature range to 100 C

Notes:Bolt-in fitment - Supplied with fixings - Drill hole size 16mm - M12 solder-tag included for tail connection to your braided cable - Kelvin/4-pole versions also available

View all products in this series

HD-PA11 Series

This series has an even higher current handling capacity than the standard heavy duty HD ranges. By use of through-pin construction and a silver alloy contacting area, current flows of up to 300 amps can be passed. The probe bolts into the probe plate and will easily disassemble for cleaning. Uses for this range include load and functional testing of bus-bars and batteries.

Test Probe Specification

Full travel
6.5mm
Working travel
4.3mm
Spring forces
initial
at wkg travel
3000g
4950g
Current rating DC cont
220 Amps
short-term max 300 Amps
Temperature range to 100 C

Notes:Bolt-in fitment - Supplied with fixings - Drill hole size 16mm - M12 solder-tag included for tail connection to your braided cable - Kelvin/4-pole versions also available

View all products in this series

HD-PA12 Series

This series has an even higher current handling capacity than the standard heavy duty HD ranges. By use of through-pin construction and a silver alloy contacting area, current flows of up to 400 amps can be passed. The probe bolts into the probe plate and will easily disassemble for cleaning. Uses for this range include load and functional testing of bus-bars and batteries.

Test Probe Specification

Full travel
6.9mm
Working travel
4.6mm
Spring forces
initial
at wkg travel
 
3000g
5300g
Current rating DC cont
300 Amps
short-term max 400 Amps
Temperature range to 100 C

Notes:Bolt-in fitment - Supplied with fixings - Drill hole size 16mm - M12 solder-tag included for tail connection to your braided cable - Kelvin/4-pole versions also available

View all products in this series