Specialist Test Products >
Switching Test Probes >
Test probes with an integral micro-switch used for electrically testing and signalling the presence of a lead or pin.
PS3 Series
Test Probe Specification
| Test centres |
2.54mm |
| Full travel (+/- .25mm) |
5mm |
| Recommended travel |
4mm |
| Switch point |
(+/- .30mm) |
1.5mm |
| Electrical (Non-conductive, DC) |
Current rating (max) |
1 Amp |
Average switch resistance |
50m |
| Spring force |
Light |
Heavy |
| At switch point |
45g |
90g |
| At recommended travel |
150g |
300g |
Receptacle Specification
Solder type, Press fit 2.0mm drill is most commonly used. Drill Part No: DS3.
|
 |
PS4 Series
Test Probe Specification
| Test centres |
.100" (2.54mm) |
| Full travel (+/- .25mm) |
.125" (3.04mm) |
| Recommended travel |
.085" (2.16mm) |
| Switch point |
(+/- .30mm) |
.030" (0.76mm) |
| Electrical (Non-conductive, DC) |
Current rating (max) |
3 Amps |
Average switch resistance |
50m |
| Spring force |
| At switch point |
6.6oz (188g) |
| At recommended travel |
7.7oz (220gm) |
Receptacle Specification
PS4CS uses RA4C receptacle
- SOLDER OTHER WIRE TO RECEPTACLE SIDE
- CONNECTOR FOR TAIL: CS4
|
|
PS5 Series
Test Probe Specification
| Test centres |
.125" (3.18mm) |
| Full travel (+/- .25mm) |
.140" (3.56mm) |
| Recommended travel |
.085" (2.16mm) |
| Switch point |
(+/- .30mm) |
.030" (0.76mm) |
| Electrical (Non-conductive, DC) |
Current rating (max) |
3 Amps |
Average switch resistance |
50m |
| Spring force |
PS5CS |
PS5CX |
| At switch point |
3.2oz (91g) |
24.8oz (703g) |
| At recommended travel |
4.5oz (213g) |
35.0oz (992g) |
Receptacle Specification
PS5CS/X uses RA5C receptacle
|
|
PS6 Series
Test Probe Specification
| Test centres |
4.5mm |
| Full travel (+/- .25mm) |
5.2mm |
| Recommended travel |
4.15mm |
| Switch point |
(+/- .30mm) |
1.7mm |
| Electrical (Non-conductive, DC) |
Current rating (max) |
5 Amp |
Average switch resistance |
50m |
| Spring force |
| At switch point |
70g |
| At recommended travel |
230g |
Receptacle Specification
Solder type, press fit 3.0mm drill is most commonly used. Drill part no. DS6
SOLDER OTHER WIRE TO RECEPTACLE SIDE
|
|
PS7 Series
Test Probe Specification
| Test centres |
.165" (4.19mm) |
| Full travel (+/- .25mm) |
.185" (4.70mm) |
| Recommended travel |
.132" (3.35mm) |
| Switch point |
(+/- .30mm) |
.025" (.635mm) |
| Electrical (Non-conductive, DC) |
Current rating (max) |
5 Amps |
Average switch resistance |
20m |
| Spring force |
| At switch point |
2.5oz (71gm) |
| At recommended travel |
4.8oz (136gm) |
Receptacle Specification
PS7CS/X uses RA7C receptacle
- SOLDER OTHER WIRE TO RECEPTACLE SIDE
- CONNECTOR FOR TAIL: CS7
|
|
LPS6 Series
Test Probe Specification
| Test centres |
4.5mm |
| Full travel (+/- .25mm) |
5.2mm |
| Recommended travel |
6.4mm |
| Switch point |
(+/- .30mm) |
1.7mm |
| Electrical (Non-conductive, DC) |
Current rating (max) |
5 Amp |
Average switch resistance |
50m |
| Spring force |
| At switch point |
70g |
| At recommended travel |
230g |
Receptacle Specification
Solder type, press fit 3.0mm drill is most commonly used. Drill part no. DS6
SOLDER OTHER WIRE TO RECEPTACLE SIDE
|
|
