Specialist Test Products >

Current flows of up to 35 amps for load and functional testing of power components such as semi-conductors, solenoids, loaded PCBs, bus-bars, wound components and batteries. This range shares identical dimensions and will readily intermix with the PA3 - PA7 series and the PC8 series respectively

For load and functional testing of bus-bars and batteries. Current flows up to 400 amps.

A range of concentric test probes intended specifically for making 4 to 6 pole (Kelvin) tests on PCBs, bus bars, equipment chassis and screw heads. tact us regarding our high current/heavy duty range.

Kelvin test pins, modules & fixture kits for the testing of transformers, chokes, relays, solenoids and cable harnesses

Probes with a broad bandwidth for making high frequency tests of RF connectors and PCBs.

Test probes with an integral micro-switch used for electrically testing and signalling the presence of a lead or pin

neumatic test probes provide an alternative to the use of conventional spring contact test probes to solve some problems in test fixture design

For the very fine pitch testing of semi-conductor devices and PCBs down to 0.46mm centres

Devices which detect the presence or absence of non-conductive features

Pinned plunger stops tip rotation which allows probing of connector pins in recessed slots

Test probes with unusually large tip diameters. Used for applications where the contact target is ill defined

Essential components for jig builders and customisers