General Purpose Test Probes > Short Reach >

Low profile, short travel test probes for restricted space applications
Applications where long travel is not required such as thin film/hybrid circuits or bareboard PCB testing
Replaceable test probe by use of a receptacle

PA1 Series

A short reach general purpose test probe for 1.27mm test centres.

Mounting hole size: 0.89/0.93mm.
0.90mm drill is most commonly used:
Drill part no. DA1. RIT tool part no. TA1

A short reach general purpose test probe for 1.91mm test centres.

Mounting hole size: 1.35/1.40mm.
1.4mm drill is most commonly used:
Drill part no. DA2. RIT tool part no. TA2A

A short reach, general purpose test probe for 2.54mm test centres.

Mounting hole size: 1.7/1.75mm.
1.75mm drill is most commonly used:
Drill part no. DA3. RIT tool part no. TA3, TA4A

A short reach general purpose test probe for 2.54mm test centres.

Mounting hole size: 1.70mm.
1.70mm drill is most commonly used:
Drill part no. DA3. RIT tool part no. TC1

A medium reach, robust general purpose test probe for 4mm test centres.

Full travel	.138" (3.5mm)
Working travel	.110" (2.8mm)
Spring force at working travel	5.4oz (150g)
Current rating DC (max)	5 Amps
Minimum test centres	.157" (4.0mm)
Other spring forces available, see under each tip style

Mounting hole size:
with receptacle 3.0mm, without receptacle 2.65mm