Specialist Test Products > Micro Test Probes > PM4 Series >

Replaceable. Plug socket. 1mm test centres. Drill hole size - 0.75mm.

Test Probe Specification

Minimum test centre	1.0mm
Full travel	1.91mm
Working travel	1.27mm
Spring force	at wkg travel
49g
Current rating DC (max)	2 AmpS
Minimum test centres	0.75mm

Installation

The tail of this micro test probe plugs into a socket installed in a second block which is located beneath the probe plate. This allows the probe to be a replaceable item, without the extra width of a receptacle around it. The socket can either have a cable crimped or soldered to it. It can also accept the RM4T terminal plug.