General Purpose Test Probes > Short Reach > PA1 Series >

A short reach general purpose test probe for 1.27mm test centres.

Test Probe Specification

Full travel
.100" (2.54mm)
Working travel
.067" (1.70mm)
Spring force
initial
at wkg travel
Light spring
0.6oz (17g)
2.8oz (79g)
Heavy spring
0.8oz (22g)
3.7oz (105g)
Current rating DC (max)
3 Amps
Minimum test centres
.050" (1.27mm)

Receptacle Specification

Mounting hole size: 0.89/0.93mm.
0.90mm drill is most commonly used:
Drill part no. DA1, RIT tool part no. TA1

How to Use


See receptacles at bottom of page

For pricing, availability or to place an order
click on a part no. below

Tip Style

CONCAVE HEAD

CONCAVE HEAD
PA1AS Light spring  
PA1AX Heavy spring  

Tip Style

PLAIN CONCAVE

PLAIN CONCAVE
PA1AS-021 Light spring  
PA1AX-021 Heavy spring  

Tip Style

REDUCED CONCAVE

REDUCED CONCAVE
PA1AS-012 Light spring  
PA1AX-012 Heavy spring  

Tip Style

RADIUS HEAD

RADIUS HEAD
PA1DS Light spring  
PA1DX Heavy spring  

Tip Style

SERRATED HEAD

SERRATED HEAD
PA1HS Light spring  
PA1HX Heavy spring  

Tip Style

PLAIN RADIUS

PLAIN RADIUS
PA1JS Light spring  
PA1JX Heavy spring  

Tip Style

CROWN HEAD

CROWN HEAD
PA1QS Light spring  
PA1QX Heavy spring  

Tip Style

SPEAR POINT

SPEAR POINT
PA1BS Light spring  
PA1BX Heavy spring  

Tip Style

PYRAMID HEAD

PYRAMID HEAD
PA1TS Light spring  
PA1TX Heavy spring  

Tip Style

PYRAMID HEAD - LOWER PROFILE

PYRAMID HEAD - LOWER PROFILE

SPA1TS

Receptacle

CRIMP - Flush fitment with press ring

CRIMP - Flush fitment with press ring

RA1C

Receptacle

CRIMP - Flush fitment with press ring

CRIMP - Flush fitment with press ring

RA1C-W450

Receptacle

SOLDER CUP - Flush fitment with press ring

SOLDER CUP - Flush fitment with press ring

RA1S

Receptacle

ROUND PIN - Flush fitment with press ring

ROUND PIN - Flush fitment with press ring

RA1R

Receptacle

SOLDER CUP - Flush fitment with stop ring

SOLDER CUP - Flush fitment with stop ring

RA1SF